One of the things that bothered me was a gap at the bottom of the door. I messed with aligning the door, but this was about as good as it would get. Something about mounting the panel did it, oh well.

Easy enough to fix with a ratchet strap put under one of the screws holding the condensing coil frame on the rear.

Snugs it right up. No, the three holes in the door were not a misguided attempt at using a hasp to do this job. It *was* for a hasp, but it was used to lock the fridge when it resided in the office break room. The side of the hasp on the main body of the fridge was glued on. No, it didn't work too well.